2. If possible, tow the tractor in the same vertical angle in which the tractor you
want to tow is.
CAUTION: If you tow the tractor horizontally while the tractor is on
a slope, you can cause damage to the tractor.
3. Prepare the transmission for towing.
GUID-D11E9849-3980-4522-A910-18DB522D92E6
1. Speed range selection - button
• Engage the parking brake.
• Change to speed range LA.
• Press down the speed range selection - button for a minimum of 3
seconds.
Setting the speed range to neutral is possible only if the driving speed is
below 1 km/h.
Transmission sets to neutral and N is displayed on the tractor terminal
display.
• If you cannot change to neutral and N does not show on the tractor
terminal display, try to change to the D range.
If you cannot change to the D range, follow the towing speeds below.
• Release the parking brake.
If you are on a slope, push and hold down the brake pedals to prevent
the tractor from moving. Release the brake pedals when you are
prepared to start the towing.
5. Troubleshooting
- 480 -
To Next Page
Loading...
