Vermeer Navigator D20x22 II Series User Manual

D20x22 Series II Navigator HDD Overview 30-35
Rod Box - Remove
Step 1: If rod box is not empty, raise rod box
cylinders to push rods into rod box.
Step 2: Shut off engine.
Step 3: Install bottom rod box support bars
(6) and retainer pins (5). Lower rod
box cylinders and shut off engine.
Step 4: Connect hoist chain to all four lift
eyes (3).
NOTICE: Lift rod box by top lift eyes only.
Step 5: Remove lower rod box keeper pins.
Step 6: Remove rod box.
5
6
3

Vermeer Navigator D20x22 II Series Specifications

General

Brand	Vermeer
Model	Navigator D20x22 II Series
Category	Construction Equipment
Language	English