Vermeer Navigator D20x22 II Series User Manual

30-10 Overview D20x22 Series II Navigator HDD
REMOTE LOCKOUT INDICATORS
A table illustrating all Remote Lockout system indicators is in the Machine Controls section. Refer to “Remote
Lockout Indicators,” page 20-6.
Fault Check/Processing Lights
When green and/or yellow lights are flashing without the buzzers sounding, the system is processing a
transition from one mode to another.
Green light flashing on remote transmitter and machine console indicates that a lockout request is in process
and has not yet been confirmed.
When the yellow light flashes on the transmitter and the alarm sounds continuously at the operator station,
either the transmitter is out of range or no radio communication is occurring between the transmitter and the
machine. The lack of communication means the transmitter is either not turned on or not functioning.
Refer to “Troubleshooting” section in the Maintenance Manual for more information.

Vermeer Navigator D20x22 II Series Specifications

General

Brand	Vermeer
Model	Navigator D20x22 II Series
Category	Construction Equipment
Language	English