D20x22 Series II Navigator HDD Electronic Controller 21-17
DPF Regen Display Status
•OFF: When OFF, passive regeneration is underway.
•AUTO: Automatic regeneration is underway.
•PARKED MODE: Machine functions are locked out, preparation for a
forced regeneration.
Passive Regeneration
The DPF is self-cleaning and generally requires no operator action. Passive
regeneration means the engine is operating at a high enough temperature
(more than 570°F/300°C) to burn particulate as it is created, and none is
being emitted.
Automatic Regeneration
When particulate matter builds up, the engine regenerates automatically. Machine operation is not interrupted.
NOTICE: Coolant temperature must be 150°F (65°C) or higher for an automatic regeneration to occur.
Inhibited (Disabled) Regeneration
Inhibit (disable) regeneration only if high exhaust temperatures pose a fire hazard, such as in confined spaces.
Scroll to “Inhibit Regen” (7) and press Enter Key to turn it ON.
Certain engine conditions also inhibit regeneration:
•out of neutral
•park brake off
•low exhaust temperature
•engine cold
If regeneration is underway and the throttle is adjusted, regeneration will be interrupted.
To Next Page
Loading...
Need help?
General
