Name: Vermeer Navigator D20x22 II Series
Brand: Vermeer
Rating: 5 (1 reviews)

To Next Page

To Previous Page

D20x22 Series II Navigator HDD Overview 30-13

REMOTE LOCKOUT SYSTEM - START

Step 1: Remove battery from charger and install in remote transmitter.

Step 2: Sit in the operator’s seat and turn ignition key to RUN position.

Step 3: Turn remote transmitter on by pressing Power ON/OFF Button and holding for 2 seconds.

Step 4: Press and hold Run Button for 2 seconds to select Run mode.

Step 5: Follow Starting Procedure, page 50-1.

REMOTE LOCKOUT SYSTEM - SHUT DOWN

NOTICE: If the machine is shut down in Lockout mode, the remote transmitter must be available upon machine

startup to cancel Lockout mode and enter Run mode.

Step 1: Shut off machine and remove key.

Step 2: Press Power ON/OFF Button and hold for 2 seconds to shut off remote transmitter.

Step 3: Remove battery pack from remote transmitter and install in charger.

Step 4: Place remote transmitter in docking station.

Questions and Answers:

Need help?

Do you have a question about the Vermeer Navigator D20x22 II Series and is the answer not in the manual?

Vermeer Navigator D20x22 II Series Specifications

General