40-6 Preparation D20x22 Series II Navigator HDD
PERSONAL PROTECTION
Operating the machine will require you to wear protective equipment. Always wear a hard hat, wraparound eye
protection or goggles, and electrically insulated boots. If working near traffic, you may need to wear reflective
clothing.
The operator is not required to wear electrically insulated gloves while seated on this self-contained directional
drilling machine. However, the operator must always wear electrically insulated boots to provide protection
against electrical shock in case of inadvertently stepping off the machine during an electrical strike.
Hearing protection must be worn by machine operator. Other crew members may need to wear hearing
protection when working close to the machine and/or support equipment.
Eye protection must consist of wraparound safety glasses or goggles.
Other workers in the immediate area must also wear hard hats and eye protection.
Wear close-fitting clothing and confine long hair.
Do not wear jewelry, such as rings, wristwatches, necklaces, or bracelets.
WARNING: Wear personal protective equipment. To reduce the risk of being caught and
entangled in moving components, wear close-fitting clothing and confine long hair. Avoid
jewelry, such as rings, wristwatches, necklaces, or bracelets.
To Next Page
Loading...
Need help?
General
