Vermeer Navigator D20x22 II Series User Manual

D20x22 Series II Navigator HDD Overview 30-7
Engine Shutdown Test
Perform Remote Lockout Test before drilling each day.
The Remote Lockout system is equipped to operate as either a hydraulic lockout (default) or an
engine shutdown system. Refer to “Hydraulic Lockout or Engine Shutdown Option,” page 30-8.
Step 1: Start machine and remain in operator’s seat.
Step 2: Press and hold black Power On/Off Button (1) for 2 seconds.
Step 3: Press and hold green Run Button (3) for 2 seconds. Green light will illuminate.
Machine is now in Drill mode.
Step 4: Test thrust and rotation controls. They should work.
Step 5: Press and release red Lockout Button (2). Red light will illuminate and engine will shut down.
Machine is now in Lockout mode. Engine must shut down. If engine does not shut down, contact
your Vermeer dealer immediately.
After successful Lockout test, press and hold the green button (3) for 2 seconds to return to Drill mode.
2
1
3

Vermeer Navigator D20x22 II Series Specifications

General

Brand	Vermeer
Model	Navigator D20x22 II Series
Category	Construction Equipment
Language	English