Vertical Summit80 - Temporary Station COS (Class of Service);Lock

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
97
LD Call Digit Count (PGM 177-Button 4)
LD Digit Code (PGM 177-Button 19)
TABLES
Toll Exception Tables (PGM 224)
Authorization Codes Table (PGM 227)
Web Admin.
STATION DATA
Station COS (Class of Service)
CO LINE DATA
Common Attributes  CO Line COS (Class of Service)
SYSTEM DATA
DISA COS (Class of Service)
PBX Access Codes
SMDR Attributes  Long Distance Call Digit Counter, Long
Distance Call Code
TABLES DATA
Toll Exception Tables
Related Features
 Authorization Codes (Password)
 Class of Service
 Direct Inward System Access (DISA)
 Temporary Station COS (Class of Service)/Lock
 Walking COS (Class of Service)
 Auto Service Mode Control
 Day/Night/Timed/Scenario Ring Mode
Hardware
2.30.3 Temporary Station COS (Class of Service)/Lock
Description
You or an Attendant can change the Station‘s Class of Service to COS (Class of Service) 7,
temporarily preventing unauthorized outside calls from the station, i.e. ―lock the station‖. The
Station can still place internal calls and Emergency number calls.
Operation
iPECS IP & LDP Phones
To activate Temporary COS (Class of Service)
1. Press the [TRANS/PGM] button.
2. Dial ―21‖, the Temp COS (Class of Service) code.