Vertical Summit80 - SOS Paging

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
305
3.11.3 SOS Paging
Description
A System announcement can be recorded and then used a page announcement. A Flex button of
an iPECS IP or LDP phone is required.
Operation
iPECS IP & LDP Phones
To assign a Flex button as a {SOS Page} button
[TRANS/PGM] + {FLEX} + ―Page code‖ + System announcement number + [HOLD/SAVE]
To activate SOS paging:
1. Press the assigned {SOS Paging} flexible button.
Condition
1. This feature can be only activated by pressing assigned flexible button in idle state.
2. The System announcement for SOS Paging can be recorded only from an Attendant
station.
3. Paging zones includes Internal, External and All Call page zones.
4. SOS paging is not restricted by the Paging timer. The entire SOS paging
announcement will play over the Page zones until complete even if the Paging time out
expires.
Programming
Keyset Admin.
STATION
Page Access (PGM 111-Button 7)
SYSTEM
Paging Timeout Timer (PGM 181-Button 9)
Web Admin.
STATION DATA
Common Attributes Page Access
Related Features
 Internal/External & All Call Page
 Integrated Voice Mail
Hardware
 iPECS IP or LDP Phone