Vertical Summit80 - Pick up Group Call Pick-Up

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
65
Conditions
1. To pick-up an outside call, you must have an idle appearance button available.
2. When several calls are ringing simultaneously, Call Pick-up will connect the oldest
highest priority call (Ringing Line Preference, PGM 173 or System Data Ringing Line
Preference Priority).
3. Queue callback and Private Line calls are not subject to Call Pick-up and such
attempts receive error tone.
4. Hands free announced intercom calls cannot be picked up by another station. Only
ringing intercom calls are subject to Call Pick-up.
5. When a station belongs to multiple groups, calls to the group with the lowest number
are answered first.
Programming
Keyset Admin.
STATION GROUPS
Station Group (PGM 190-Button 1)
SYSTEM
Ringing Line Preference Priority (PGM 173)
Web Admin.
STATION GROUP
DATA
Station Group Assignment Group Type, Pick-up Attribute
SYSTEM DATA
RLP (Ringing Line Preference) Priority
Related Features
 Intercom Signaling Mode
 Ringing Line Preference
 Directed Call Pick-Up
 Station Groups
 Private Line
Hardware
2.18.3 Pick Up Group Call Pick-Up
Description
You can answer (―Pick-Up‖) incoming and transferred intercom and outside calls ringing at
another station in the same Pick-up Group. All ringing calls, except Private Line calls, queue
Callbacks and recalls from hold are subject to Pick-up by other stations in the same Pick-up
group.
iPECS IP and LDP Phone users may assign a Flex button as a {PICK UP GROUP CALL PICK-
UP} button.