Vertical Summit80 - Call Forward

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
56
2.15 Call Forward
Description
You can have selected incoming calls re-routed to other stations (local or networked), station
groups, the integrated Auto Attendant/Voice Mail, or over a system outside Line (Off Net).
The user selects the type and condition under which calls will forward by entering a Call Forward
code as follows:
Code 0:
Remote Call Forward, forwards all calls to the station, except recalls, activated from a
remote station, Call Forward, Follow-me.
Code 1:
Unconditional, all calls to the station, except recalls, are forwarded internally or externally
immediately upon receipt.
Code 2:
Busy, if the station is busy, forwards all calls, except recalls, to the selected station.
Code 3:
No Answer, forwards all calls, except recalls, to the selected station when the station does
not answer within the No Answer timer.
Code 4:
Busy/No Answer, forwards calls if the selected station is busy or does not answer within the
No Answer timer.
Code 5:
Attendant Off-Premise, forwards incoming outside calls to an outside number.
Code 6:
Off-Net Unconditional, all calls to the station, except recalls, forward internally or externally,
only SLT.
Code 7:
Off Net Busy, forwards all calls, except recalls, to the selected station when station is busy,
only SLT.
Code 8:
Off Net No Answer, forwards all calls, except recalls, to the selected station when the station
does not answer within the No Answer timer, only SLT.
Code 9:
Off Net Busy/No Answer, forwards calls if the selected station is busy or does not answer
within the No Answer timer, only SLT.
Operation
iPECS IP & LDP Phones
To activate Call Forward, (Unconditional, Busy, No Answer, or Busy/No Answer)
1. Lift the handset or press the [SPEAKER] button to receive dial tone.
2. Press the [FWD] button or Soft key. For the LIP8002, the [DND] button is used to activate
Forward.
3. Dial desired Call Forward code (―1‖~―4‖).
4. Dial the station or station group to receive calls.
Or, Dial an outside Line access code (9, 8xx, 88xx) and the desired external phone number.
5. Press the [HOLD/SAVE] button to save.
Or, Press the [SPEED] button and dial the desired bin number.