Vertical Summit80 - Mark a Message for Delivery Confirmation

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
152
2.47.3.7 Mark a Message for Delivery Confirmation
Description
You can mark a message so that when the receiver listens to the message you are notified with a
confirmation Voice message.
Operation
To mark a message for Delivery Confirmation,
1. After identifying the receiver, you will receive the send message options prompt
―For regular delivery, press 1 to mark urgent, press 2 to mark private, press 3 to mark
urgent and private, press 4 to request delivery receipt of the message for future, press
5.‖
2. Dial ―5‖, the message is sent.
3. After the receiver listens to the message you receive a confirming Voice message with the
Mailbox number that received the message and the time the message was received
(listened to).
Conditions
1. You must be permitted to mark a message for Delivery Confirmation as part of the VM
COS.
Programming
Keyset Admin.
SYSTEM
VM COS Attributes (PGM 253)
Web Admin.
SYSTEM DATA
VM COS Attributes
Related Features
 Send a Message
Hardware