Vertical Summit80 - Intercom Lock-Out

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
285
3.6 Intercom Lock-Out
Description
If you take no action after going off-hook for the Dial Tone timer or fail to dial an additional digit
within the Inter-digit timer, you will receive error tone for 30 seconds and be placed out-of-service
(locked-out). The LED of associated {DSS/BLF} buttons as well as the station‘s [ICM] button, if
configured, flutter rapidly to indicate the out-of-service state.
For iPECS IP & LDP Phone users, if the [SPEAKER] is used, the station will receive error tone
for 30 second and then automatically return to idle and will not ―Lock-out‖.
Operation
System
Operation of Intercom Lockout is automatic based on the Dial Tone & Inter-digit timers.
Conditions
1. If the station is assigned Howler Tone, error tone is presented for 30 seconds followed
by 30 seconds of Howler tone followed by lockout and silence.
Programming
Keyset Admin.
STATION
Howler Tone (PGM 111-Button 5)
SYSTEM
ICM Dial Tone Timer (PGM 181-Button 6)
Inter Digit Timer (PGM 181-Button 7)
Web Admin.
STATION DATA
Terminal Attributes Howler Tone
SYSTEM DATA
System Timers ICM Dial Tone Timer, Inter Digit Timer
Related Features
 Intercom Call (ICM Call)
Hardware