Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
391
6.3 Attendant Positions
Description
The iPECS Summit80 system has the capacity for 4 Attendants (1 System Attendant / 3 Main
Attendants) and iPECS Summit800 System has the capacity for 5 Attendants. Attendants have
enhanced call and control capabilities and are designated to receive dial ‘0‘ calls from other users.
There are 2 different types of Attendant as follows,
System Attendant - The first station in the Attendant Group. In addition to Main
Attendant features, the System Attendant is commonly used for System Attendant
Programming, Admin Programming and Day/Night/Timed Mode control.
Main Attendant – Attendant group stations other than the first station of the Attendant
Group.
Operation
Condition
1. As a default, the first Attendant (System Attendant) is assigned as Station 100 (logical
number) for Summit80 and Station 1000 for Summit800, and others are not assigned.
In the Summit, the first digital phone port is designated as the System Attendant and is
Station number 100 for Summit80 and 1000 for Summit800.
2. Attendant calls (dialing ―0‖) and recalls are routed to first available attendant.
Programming
Keyset Admin.
System Attendant Assignment (PGM 164-Button 1)
Main Attendants Assignment (PGM 164-Button 2~4)
Web Admin.
Attendant Assignment System Attendant, Main Attendant
Related Features
Hardware
iPECS IP or LDP Multi-button Phone, a 24-button phone is recommended
To Next Page
Loading...
