Vertical Summit80 - On-Hook Dialing

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
364
5.15 On-Hook Dialing
Description
Using your iPECS IP or LDP Phones equipped with a Speakerphone, you can place as well as
receive calls while the handset is on-hook.
With Automatic Speaker Select, you need not press the speaker button to initiate a call, simply
dial the number or press a button to activate the Speakerphone is automatically.
Operation
iPECS IP & LDP Phones
To activate On-Hook Dialing
1. Place desired call (dial station ICM number, select a Line and dial, etc.) the [SPEAKER]
button LED lights and the call is processed.
Conditions
1. When you place a call in using On-hook dialing, you activate the Speakerphone and,
you must press the illuminated [SPEAKER] button to return to idle.
2. When the speakerphone is used, the microphone is active unless the [MUTE] button is
pressed and the [MUTE] button LED is On.
Programming
Keyset Admin.
STATION
Auto Speaker Selection (PGM 111-Button 1)
Web Admin.
STATION DATA
Terminal Attributes Auto Speaker Selection
Related Features
 Mute
 Speakerphone
 Automatic Speaker Select
 Headset Compatibility
 Group Listening
Hardware
 iPECS IP or LDP Phone