Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
158
Operation
To access a Message Retrieval option
1. At any time after the ―Number of Messages‖ prompt, dial the digit to play a message. The
system initiates the selection providing any needed prompts.
Conditions
1. You must begin dialing within the CCR Analysis timer in response to a system prompt.
If the timer expires, the system will disconnect the call and you will receive error tone.
2. When the ―call sender‖ option results in an external call, dialing restrictions will be
applied based on your Station COS (Class of Service).
3. If you remain off-hook after a call placed through the Voice Mail is complete, you will
be returned to the previous place in the Voice Mailbox. If you hangs up, the integrate
Voice Mail will recall you and, upon answer will play ―Request Mailbox Number‖ prompt.
4. If your Mailbox is configured with Auto Save New Message, after listening to the
message, the message is stored and you must be expressly delete the message. To
minimize the potential for large amounts of unwanted stored messages, Auto Save
New message can be disabled then the message is deleted if not expressly saved.
Programming
Keyset Admin.
Auto Save New Message (PGM 161-Button 24-11)
Web Admin.
System Attributes Auto Save New Message, Station VM
Feature Usage
Related Features
Message Retrieval
Remote Message Retrieval
Voice Mailbox Settings
Class of Service
Hardware
2.47.3.11 Message Storage
Description
When you activate Call Forward to the integrated Voice Mail, calls are transferred to your mailbox
or recall the Auto Attendant, the call is handled by the iPECS Voice Mail application. The caller
connects to your User Greeting followed by beep tone to notify the caller to leave a message.
The caller can record a message and hang-up or dial ―*‖ for further options. At disconnect, the VM
To Next Page
Loading...
