Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
160
System Timers Call Forward No Answer Timer,
VSF User Maximum Record Timer, VSF Valid User
Message Timer
Related Features
Call Forward
Station Message Wait/Call Back
Integrated AA/VM Overview
Call Transfer, Voice Mail
Hardware
2.47.3.12 Outbound Message Notification
Description
When a new message is received, the system will check the new message notification settings.
If configured to notify your Mobile extension, the system will place a call to your mobile phone and,
when answered, play the station number prompt followed by the new message prompt, ―You
have xx new messages.‖ The new message prompt indicates the number of unheard messages.
After the new message prompt you will be prompted to enter your password, which will access
your mailbox. You must listen to the new messages to confirm the notification.
If you take no action within the CCR Inter-digit timer, do not answer, the system receives busy or
you hang-up, the call is disconnected and the system will retry the call after the retry timer expires.
The system will attempt to complete the notification until you listen to the message or the number
of attempts reaches the DISA Retry counter.
Operation
To receive and confirm the notification
1. Answer Notification call and receive the New messages and password prompt.
2. Enter your Mailbox password.
3. Listen to the new messages.
Condition
1. Caller Id will be the external caller who left the message or, for messages from another
station, Caller Id will be the station receiving the message.
2. If notification is disabled, any existing notification will be terminated after the initial
notification call.
3. For proper operation, the Station COS (Class of Service) and CO Group access for the
station must be such as to allow the notification call.
To Next Page
Loading...
