Vertical Summit80 - Message Cascade

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
153
2.47.3.8 Message Cascade
Description
Message cascading copies or moves messages left for the originating mailbox to another mailbox.
Once the message is copied or moved into the each mailbox, notification events can take place
based on the mailbox settings. Multiple Mailboxes (up to 5 mailbox stations per a station) can be
assigned as Cascade Mailbox destination.
There are 4 options.
1. Cascade Method : Decide Cascade Method
A. Disable Cascade
B. Copy Cascade
C. Move Cascade.
2. Cascade Message Type : Choose Message Type for Cascading
A. All (Normal Message + Urgent Message)
B. Normal Message Only
C. Urgent Message Only.
3. Cascade Apply type : Choose Cascade working type
A. Immediate : the message is cascaded as soon as the message is left.
B. After Notify Retry Count : the message is cascaded after notify retry count.
C. After Cascade Timer : the message is cascaded after cascade timer.
4. Cascade Timer : If Cascade Apply Type is set to After Cascade Timer, this timer value is
applied.
Operation
Operation of a Cascade Mailbox is automatic once configured.
With 4 options combination, Cascade way is decided.
Conditions
1. Message Cascading is only allowed within programmed destination mailboxes in PGM
127, to protect unintentional cascade to other mailboxes.
2. Same cascade mailbox number is not saved in PGM 127.
3. Mailbox owner number is not saved in PGM 127.
Programming
Keyset Admin.
Station
Station VM Attribute (PGM 127)
Web Admin.
STATION DATA
VM Attributes  Cascade Mailbox 1~5
VM Attributes  Cascade Method
VM Attributes  Cascade Message Type
VM Attributes  Cascade Apply Type
VM Attributes  Cascade Timer.