Vertical Summit80 - CO Line Ring Detect

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
313
4.5 CO Line Ring Detect
Description
The system incorporates timers for Ring-on and Ring-off durations to assure proper alerting.
When the duration of the ring signal exceeds the Ring-on timer, alerting will start. When the ring
is not present for a period exceeding the Ring-off timer, alerting will stop. This allows the system
Ring cycle detection to be matched to various PBX and carrier systems.
Operation
System
Operation of Ring detect is automatic.
Conditions
1. Ring On and Ring Off are assigned on a system basis.
2. The CO Ring Detect is applied to analog CO Lines only.
Programming
Keyset Admin.
SYSTEM
CO Ring OFF Timer (PGM 180-Button 17)
CO Ring ON Timer (PGM 180-Button 18)
Web Admin.
SYSTEM DATA
System Timers CO Ring On Timer, CO Ring Off Timer
Related Features
Hardware