Vertical Summit80 - Paging; Internal;External & All Call Page

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
301
3.11 Paging
3.11.1 Internal/External & All Call Page
Description
If your station is permitted to access page facilities, you can connect and transmit voice
announcements to any or all of the systems Internal/External Page zones. Stations are grouped
into ―zones‖ to receive pages to the zone. Stations not assigned to any zone will not receive
pages including All Call pages.
A page warning tone, if assigned, will be provided to the Page Zone(s) prior to the audio
connection. You may continue the page announcement for the specified Page Time-out after
which you will be disconnected and the Page Zone(s) returned to idle.
The default Page Zone dial codes are as follows:
Internal Page Zones
301~335(Summit80) /
*301~*400(Summit800)
Internal All Call Page
543
External Page Zones
545
External All Call Page
548
All Call Page
549
Flexible buttons of iPECS IP and LDP Phones may be assigned to access a Page Zone as a
{PAGE ZONE} button.
Operation
iPECS IP & LDP Phones
To assign a Flex button as a {PAGE ZONE} button
[TRANS/PGM] + {FLEX} + Page Zone number + [HOLD/SAVE]
To make a page,
1. Lift the handset.
2. Dial the desired paging code or press a {PAGE ZONE} button.
3. If assigned, after the Page Warning Tone, make announcement.
4. Replace the handset to return to idle.
To queue for a page when busy is received.
1. Press the [MESSAGE/CALL BACK] button.
2. Replace the handset returning to idle.