Vertical Summit80 - Call Transfer, System Announcement

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
71
Web Admin.
STATION DATA
Common Attributes Ringing Line Preference
SYSTEM DATA
System Timers Transfer Recall Timer
Related Features
 Hold Recall
 Call Transfer, CO/IP
 Call Waiting/Camp-On
 Station Flexible Buttons
Hardware
2.20.3 Call Transfer, System Announcement
Description
You can transfer outside calls to a System announcement allowing the system to play the
announcement and, if configured, the party can then dial digits to route the call further.
After transferring to a System announcement the system establishes DISA (Direct Inbound
System Access) service for the outside party.
Operation
iPECS IP & LDP Phones
To transfer an active call to a System announcement,
1. Press the [TRANS/PGM] button.
2. Dial ‗55*‘ and the System announcement (01-70).
3. Hang-up to complete the transfer.
SLT
To transfer an active call to a System announcement
1. Momentarily depress the hook-switch.
2. Dial ‗55*‘ and the System announcement number.
3. Hang-up to complete the transfer.
Conditions
1. Only an outside call can be transferred to a System announcement.
Programming