Vertical Summit80 - Prepaid Call

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
203
2.70 Prepaid Call
Description
Prepaid refers to services paid for in advance.
There are two kinds of prepaid call. One is CO prepaid call and the other one is Station prepaid
call. If a CO line is configured to use prepaid call, the CO line is available for outgoing call until
prepaid money becomes empty. When you make prepaid calls, the prepaid money is deducted
based on call metering pulse. Eventually, if prepaid money of a CO line is consumed completely,
users can not make an outgoing call with that CO line.
If a station is configured to use prepaid call, it can use outgoing call until its prepaid money is
used up.
Operation
Operation of this feature is automatic when configured.
Conditions
1. CO prepaid call has a higher priority than station prepaid call.
A. If a CO is allowed to use prepaid call, a station of which station prepaid call is not
possible can make an outgoing call with that CO.
B. On the contrary, if a CO is not allowed to use prepaid call, a station of which station
prepaid call is possible can‘t access to that CO for outgoing call.
2. Emergency call will be possible even if Station or CO prepaid money is empty.
Programming
Keyset Admin.
CO/IP
Prepaid Call (PGM 141-Button 21)
Prepaid Money (PGM 141-Button 22)
Related Features
 Station prepaid call
 SMDR (Station Message Detail Recording)- Call Cost display
 Outside Call Warning Tone Timer
Hardware