Vertical Summit80 - 2.17 Call Park

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
51
2.11 Auto Service Mode Control
Description
The service mode defines different ring assignments, COS (Class of Service) and answering
privileges for the external network connections and Stations in the system based on the time-of
day. The service mode can be controlled automatically through definitions in the Auto Ring Mode
Selection Table(Weekly Time table), which defines the time of day for the Day, Night and Timed
shift modes.
The Attendant may change the service mode selection from automatic to manual selecting the
Day, Night, timed or Scenario mode.
Operation
System
Operation of this feature is automatic.
Conditions
Programming
Keyset Admin.
STATION
Station COS (Class of Service) (PGM 116)
CO/IP
CO/IP CO Ring Assignment (PGM 144)
CO Line COS (Class of Service) (PGM 141-Button 2)
SYSTEM
DISA COS (Class of Service) (PGM 166)
External Control Contact (PGM 168)
PABX Access Codes (PGM 172)
LD Call Digit Count (PGM 177-Button 4)
Long Distance Code (PGM 177-Button 19)
TABLES
Toll Restriction Tables (PGM 224)
Authorization Codes Table (PGM 227)
Weekly Time Table (PGM 233)
Web Admin.
STATION DATA
Station COS
CO LINE DATA
CO/IP Ring Assignment
Common Attributes CO Line COS (Class of Service)
SYSTEM DATA
DISA COS (Class of Service)
External Control Contact
PBX Access Codes
Attendant Assignment
SMDR Attributes  Long Distance Call Digit Counter, Long
Distance Code