Vertical Summit80 - Wake-Up Alarm, Enhanced

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
268
2.83 Wake-Up Alarm, Enhanced
Description
If permitted in the system database, you can set up to five (5) Wake-up or alerting time. When a
time is reached, the system will signal your station with an audible and visual signal. The alerting
for each of the 5 Wake-up alarms will repeat based on the type selected when you assign the
alarm.
The alarms will repeat as follows:
Repeat Type
Repeating
1
Alarm activates one time at the assigned date and time
2
Alarm repeats daily Monday through Friday
3
Alarm will repeat daily, Monday through Saturday
4
Alarm will repeat daily
Operation
Attendant
To register a Wake-Up alarm
1. Press the [TRANS/PGM] button.
2. Dial ―044‖, the Attendant Set Wake-Up code.
3. Dial the station range to be alerted. If a single station is to receive the alarm, enter ―*‖ as the
second station number.
4. Dial the desired 2-digit hour (24-hour mode), then 2-digit minute for alerting.
5. Enter Repeating type, ―1‖ to ―4‖.
6. For the one-time alarm (repeating type 1), enter the date for the alarm as 2 digits for year,
month and day of the month.
7. Press the [HOLD/SAVE] button.
To erase Wake-Up
1. Press the [TRANS/PGM] button.
2. Dial ―045‖, the Attendant Erase Wake-up code.
3. Dial the desired station range, for a single station, enter an ―*‖ as the second station number.
4. Press the [HOLD/SAVE] button.