Vertical Summit80 - Ringing Line Preference

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
206
2.72 Ringing Line Preference
Description
When Ringing Line Preference is enabled, you answer incoming calls by lifting the handset or
pressing the [SPEAKER] button. You may select a Line before lifting the handset or pressing the
[SPEAKER] button, which will override Ringing Line Preference and connect you to the Line you
selected.
Operation
iPECS IP & LDP Phones
To answer a call while the station is ringing
1. Lift the handset or press the [SPEAKER] button.
Conditions
1. When multiple calls are ringing at the station, a priority defines the order in which calls
are answered. The default priority is: Transfer > recalls > incoming calls > queued calls.
2. Intercom calls are always given the lowest answering priority.
3. Ringing Line Preference overrides Prime Line assignment.
4. SLTs operate only in the RLP mode; when ringing, lifting the handset connects the
SLT to the ringing call.
Programming
Keyset Admin.
STATION
Auto Speaker Select (PGM111-Button 1)
Ringing Line Preference (PGM 112-Button 7)
CO/IP
CO Ring Assignments (PGM 144)
SYSTEM
Ring Line Preference Priority (PGM 173)
Web Admin.
STATION DATA
Terminal Attributes Auto Speaker Selection
Common Attributes Ringing Line Preference
CO LINE DATA
CO/IP Ring Assignment
SYSTEM DATA
RLP (Ring Line Preference) Priority
Related Features
 Prime Line Immediately/Delayed
 Automatic Speaker Select
Hardware