Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
304
3.11.2 Meet Me Page
Description
During a Page, you may request another user respond to the Page and ―Meet‖ you by dialing the
Meet-Me code. When the party dials the Meet-Me code, the page is terminated and an intercom
call is connected between you and the party.
Flexible buttons of iPECS IP and LDP Phones may be assigned as a {MEET ME} button.
Operation
iPECS IP & LDP Phones
To assign a Flex button as a {MEET ME} button
[TRANS/PGM] + {FLEX} + ―544‖ + [HOLD/SAVE]
To answer a page with Meet Me Page
1. Lift the handset or press the [SPEAKER] button.
2. Dial ―544‖, the Meet Me Page code or press the {MEET-ME} button.
SLT
To answer a page with Meet Me Page
1. Lift the handset to receive intercom dial tone.
2. Dial ―544‖, the Meet Me Page code.
Conditions
1. A Meet Me Page must be answered within the Page Time-out timer.
2. A station may answer a Meet Me Page from any station regardless of pickup or paging
group assignments and page access permission.
3. The paging party must remain off-hook until the paged party answers the Meet Me
request. The initiator may press the Mute button to eliminate transmitting audio over
the page circuit while waiting for the party to answer.
Programming
Keyset Admin.
Paging Timeout (PGM 181-Button 9)
Web Admin.
System Timers Paging Timeout Timer
Related Features
Internal/External & All Call Page
Hardware
To Next Page
Loading...
