Vertical Summit80 - Attendant Recall

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
392
6.4 Attendant Recall
Description
Unanswered or abandoned outside calls that remain unanswered for the Hold or Transfer Hold
timer, as appropriate, will recall the station placing the call on hold. If the call remains unanswered
for the assigned Recall time, the first available Attendant will also receive recall. The Attendant
and station will receive the recall signal for the Attendant Recall Timer period after which the
system will disconnect and return the outside Line to idle.
Operation
System
Attendant recall operation is automatic.
Conditions
Programming
Keyset Admin.
SYSTEM
Attendant Recall Timer (PGM 180-Button 1)
ICM Hold Recall Timer (PGM 180-Button 5)
Web Admin.
SYSTEM DATA
System Timers Attendant Recall Timer, I-Hold Recall
Timer
Related Features
 Hold
 Call Transfer
Hardware
 iPECS IP or LDP Multi-button Phone, a 24-button phone is recommended