Vertical Summit80 - Net Call Identification Service; Network Call Back (Call Completion)

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
241
2.79.2.3 Net Call Identification Service
Description
When Calling Name Identification Presentation (CNIP) and Connected Name Identification
Presentation (CONP) are enabled, the station name is provided as the caller identification
received and displayed at a station receiving a call from a Networked station.
Operation
Operation of the Station Name Display is automatic when configured.
Conditions
1. The Station Name must be defined in the system of the calling station.
Programming
Web Admin.
STATION DATA
Station Name Display
NETWORKING DATA
Net Basic AttributesNet CNIP Enable, Net CONP Enable
Related Features
 Net Intercom Call
 Net Call Transfer
Hardware
2.79.2.4 Network Call back (Call Completion)
Description
When you call a networked station that is busy, you can leave a Call Back request. When the
busy station returns to idle, you will receive a Call Back from the system. Upon answer, the
iPECS Summit will place a call to the originally busy station. Network Call Back operates in the
same manner as Call Back and is subject to the conditions associated with Call Back.
From a network perspective, iPECS Summit employs H.450 Call Completion, Busy Subscriber
(CCBS) protocol to provide call back capabilities. iPECS Summit supports the Connection Retain
mode in the H.450 (CCBS) protocol
Operation
To activate a NetworkCall Back while receiving busy tone:
1. Press the [CALLBK] button.
2. The call is cleared after a confirmation tone.