Vertical Summit80 - Page 166

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
155
Operation
iPECS IP & LDP Phones
To assign a {VMAILBOX} Flex button;
[TRANS/PGM] + {FLEX} + VM group + Mail-box (station) number + [HOLD/SAVE]
To retrieve Voice Mail locally
1. Lift the handset or press the [SPEAKER] button.
2. Press [MESSAGE/CALLBACK] button. The message contents summary is shown as
below.
ST CL VS VM FS MS
001 001 005 006 001 004
3. Dial digit ―3‖ to select the integrated VM Messages to receive the ―Mail Box & Password‖
prompts sequentially.
4. Dial the Mail Box and corresponding password to receive the ―Number of Messages‖
prompt.
5. Dial desired option code.
6. At completion of session, hang-up to return to idle.
Or,
1. Lift the handset or press the [SPEAKER] button.
2. Press {VMAILBOX} button.
3. Dial the Mailbox password to receive the ―Number of Messages‖ prompt.
4. Dial desired option code.
5. At completion of session, hang-up to return to idle.
To attach a memo to the current voice message;
1. During or after the New or Old Message option prompt, dial ―7‖.
2. At the beep, record the memo.
3. Dial ―*‖ to stop recording and store the memo.
4. During or after the New/Old option prompt, dial 4 to forward the message and memo.
SLT
To retrieve Voice Mail locally
1. Lift the handset.
2. Dial the Voice Mail Group to receive the Mailbox number and Password prompts.
3. Dial the Mailbox and corresponding password to receive the ―Number of Messages‖ prompt.
4. Dial desired option code.
5. At completion of session, hang-up to return to idle.
To attach a memo to the current voice message;
1. During or after the New or Old Message option prompt, dial ―7‖.