Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
246
To return a call for the current Station Message
1. Press the [HOLD/SAVE] button.
To delete the first Message Wait from the list
1. Press the ―*‖ button, the list is updated removing the message from the list.
To delete all waiting Messages
1. Press the[SPEED] button.
2. Press the ―*‖ button twice.
SLT
To leave a Message Wait, while receiving ring back tone or no response on a call announce
1. Momentarily press the hook switch.
2. Dial ―556‖, the Message Wait/Call Back code.
3. Hang up, Message Wait is activated.
To leave a Message Wait, while receiving DND tone
1. Momentarily press the hook switch.
2. Dial ―556‖, the Message Wait/Call Back code.
3. Hang up, Message Wait activated.
To retrieve a Station Message Wait;
1. Dial ―557‖, the Message Wait/Call Back response code.
Conditions
1. The system employs a line from the Network CO Group to return a Station Message
Wait call back.
2. Only LIP and LDP Phones with an LCD can receive a Station Message Wait from a
networked station.
Programming
Keyset Admin.
Networking Basic Attribute (PGM 320)
Networking CO Line Attribute (PGM 322)
Network Numbering Plan Table (PGM 324)
Network Feature Code Table (PGM 325)
Web Admin.
Net Basic Attributes
Net CO Line Attributes
Net Numbering Plan
Related Features
To Next Page
Loading...
