Vertical Summit80 - Page 267

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
256
To queue for a page when busy tone is received:
1. Dial ―556‖, the Call Back code.
2. Replace the handset returning to idle.
Conditions
1. The conditions such as Page Access, Page Time-out, etc. apply to Network Paging.
2. A Network Page code must be programmed in Networking Data Net Numbering Plan
in the calling system.
3. A Network Page code and page destination must be programmed in Networking Data
 Net Feature Code Table in the called system.
4. The Network Page destination can be Internal Page, External Page and All Call Page.
5. You will hear error tone if there is no idle networking path or if the page destination is
invalid.
6. You can page within a networked system without lifting the handset.
Programming
Keyset Admin.
NETWORKING DATA
Net Basic Attributes
Net CO Line Attributes
Net Numbering Plan
Net Feature Code Table
Web Admin.
NETWORKING DATA
Net Basic Attributes
Net CO Line Attributes
Net Numbering Plan
Net Feature Code Table
Related Features
 Internal/External & All Call Page
Hardware