Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
270
Conditions
1. When registering or erasing an Alarm, iPECS IP and LDP phones can use the [VOL
UP]/[VOL DOWN] buttons to scroll between the Wake-up alarms and ―#‖ can be used
to scroll through the repeating types.
2. The iPECS IP and LDP phones will display an asterisk near the time to indicate a
Wake-up alarm is set for the current day.
3. If you have all five Wake-up Alarms set, the Attendant cannot set a Wake-up alarm for
you. When the Attendant sets an alarm you it is assigned to the lowest Wake-up Alarm
index number (1-5) available for the station. If no Alarm index is available, the
Attendant setting is ignored
4. When the Attendant erases the Wake-up alarm, all five alarm indices are erased.
5. Changing the Wake-up alarms from standard to enhanced, will cancel and erase all
active Wake-up alarms.
6. For the one time alarm, the year can be set from 2000 to 2031.
Programming
Keyset Admin.
Wake Up Announcement (PGM 114-Button 24-6)
Enhanced Wake-Up Usage (PGM 161-Button 24-23)
Web Admin.
VM Attributes Wake-Up Announcement
Related Features
Wake-up Alarm, Standard
Hardware
To Next Page
Loading...
