Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
383
Operation
iPECS IP & LDP Phones
To assign a Station User Program Code to a Flex button
1. Press the [TRANS/PGM] button, the Station User Program Menu is displayed.
2. Press the desired Flex button.
3. Dial the desired Station User Program Code and additional inputs that may be required.
4. Press the [HOLD/SAVE] button.
To activate a Station User Program Code feature or function
1. Press the [TRANS/PGM] button, the Station User Program Menu is displayed.
2. If desired, use the [VOL UP]/[VOL DOWN] to display the desired menu item, or dial the
desired Station User Program Code with additional inputs as required.
Programming
Conditions
Related Features
Station Flexible Buttons
Temporary Station COS (Class of Service)/Lock
Walking COS (Class of Service)
Station Message Wait/Call Back
CLI Message Wait
Wake-Up Alarm
Pre-defined & Custom Text Display Messages
Headset Compatibility
Attendant Station Program Codes
Hardware
iPECS IP or LDP Phone w/Display
To Next Page
Loading...
