Vertical Summit80 - Page 59

Vertical Summit80 & Summit800
Feature Description and Operation Manual Issue 1.2
48
ACNR Tone Detect
After dialing, the system will abandon the attempt if
no tone or answer is detected within the Tone Detect
time.
ACNR Retry Count
Count determines the number of times system will
attempt the call before ACNR is automatically
cancelled.
2. The call will be placed on the same outside Line as originally used. If the Line is busy,
an available Line in the same Line group will be seized.
3. The ACNR Retry Counter decrements by one when the system completes the dialed
number.
4. When the ACNR Pause Timer expires, if the station is in a busy state, the ACNR Delay
Timer is invoked.
5. Upon completion of dialing, the system will monitor the call for progress signals.
6. To preserve ACNR feature in activated state, SLT user does not go On-Hook.
7. While ACNR dialing or waiting state, if SLT user goes On-Hook, then SLT ACNR is
deactivated, automatically.
8. While ACNR is active for an SLT, the SLT user cannot receive or place a call.
Programming
Keyset Admin.
SYSTEM
ACNR Delay Timer (PGM 180-Button 8)
ACNR Pause Timer (PGM 180-Button 9)
ACNR Retry Counter (PGM 180-Button 10)
ACNR Tone Detect Timer (PGM 180-Button 11)
NUMBERING
SLT ACNR Code (PGM 109-Button 18)
Web Admin.
SYSTEM ID &
NUMBERING PLANS
Flexible Numbering Plan SLT ACNR
SYSTEM DATA
System Timers ACNR Delay Timer, ACNR Pause Timer,
ACNR Retry Counter, ACNR Tone Detect Timer
Related Features
 LNR (Last Number Redial)
 Speakerphone
 Mute
Hardware
 iPECS IP or LDP Phone