10 General Maintenance
This chapter provides a general maintenance checklist for the SmartRow™ 2 infrastructure solution and a maintenance
schedule for the cooling system to ensure system operations are being properly maintained.
WARNING! Maintenance operations must be done by professional personnel authorized by Vertiv Technical
Training.
WARNING! To ensure personal safety, professional maintenance personnel must determine if it is necessary
to cut off the total input power to the SmartRow™ 2 infrastructure solution based on the systems's usage
status and maintenance content.
Note the following about performing maintenance operations on the solution:
• It is recommended to select the original parts produced by Vertiv Co., Ltd. to ensure the economics, stability, and
maintainability of the system operation.
• Ensure proper use of the SmartRow™ 2 infrastructure solution and follow daily inspection strictly accordance
with the relevant descriptions in the user manual.
• The external installation of the infrastructure solution (including external power wiring, line installation, and
related engineering installation) is subject to strict compliance with user manual requirements and local
regulations, especially for power, refrigeration, and production.
• To ensure the normal operation of the equipment, routine inspections must be carried out on a regular basis. The
recommended period is monthly inspections.
10 General Maintenance Proprietary and Confidential ©2024 Vertiv Group Corp. 109
Vertiv™ SmartRow™ 2 Infrastructure Solution User Guide
To Next Page