Vertiv SmartRow 2 - Devices Overview; Safe Management (Mgmt); Door Access Management

Displays settings
To change the background image:
NOTE: Only the following image file extensions are acceptable for upload: .png, .jpg, .jpeg, .bmp, and .gif.
NOTE: The image file size cannot exceed 500 KB.
1. Click the enter setup mode icon on the right-hand side of the Overview section to enter the setup state.
2. Click the Change background image icon.
3. Browse to and select the new background image.
4. Click Upload. The new image has been added.
5. Click on the current image. A dialogue box appears: Are you sure you want to replace the current background
image?
6. Click Confirm.
To configure the Signal Display Mode:
1. Click the enter setup mode icon on the right-hand side of the Overview section to enter the setup state.
2. Click the SignalDisplay Mode icon.
3. Select the appropriate SignalDisplayMode: On Hover, Always Show, or Auto Polling
NOTE: If selecting Auto Polling, you must enter the auto polling interval time in seconds.
4. ClickSave.
General settings
To return to the browser state:
1. Click the enter setup mode icon on the right-hand side of the Overview section to enter the setup state.
2. Click the Back to Browser icon to return to the browse state.
9.2.2 IT devices overview
The ITDevices Overview page contains corresponding information related to the devices. For additional information, please
refer to the Vertiv™ Liebert® RDU501 Intelligent Monitoring Unit User Manual shipped with the unit and located on
www.Vertiv.com.
9.3 Safe Management (Mgmt)
The Safe Management page monitors and manages the security of the cabinet through video surveillance, access control, and
fire fighting management functions. From the left-hand sidebar, click the Safe Mgmt icon to access the following three
submenus: Fire Fighting, Door Access Management (Mgmt), and Video Surveillance.
9.3.1 Door access management
The Door Access Mgmt tab allows you to configure and view information related to card management, authorization
management, historical events, resetting authorization, and remote control capabilities.
Card management
NOTE: This tab can be hidden from the System Settings - Monitoring Unit - Settings Signal page.
9 Vertiv™ Liebert® RDU501
Intelligent Monitoring Unit Web User
Interface (UI)
Proprietary and Confidential ©2024 Vertiv Group Corp. 97
Vertiv™ SmartRow™ 2 Infrastructure Solution User Guide