Wacker Neuson EZ17 - Page 104

5-22 OM EZ17 us 1.0 * ez17b510.fm
5
The lever is located at the left under the seat.
1. Set the lever to position B.
2. Raise the machine evenly and horizontally by means of the boom and
the stabilizer blade.
3. The telescopic travel gear is controlled via lever
10.
Information
In order to ensure maximum stability during work:
► Only perform work with an extended telescopic travel gear.
► Lower the stabilizer blade and turn out the extensions.
A
B
Fig. 102
Position Function
A The stabilizer blade is set in this position.
B The telescopic travel gear is set in this position.
Fig. 103
1
2
10
Fig. 104
Position Function
1 Push lever 8 forward
The travel gear is extended
(wide track).
2 Pull lever 8 backward
The travel gear is retracted
(narrow track).