OM EZ17 us 1.0 * ez17i400.fm 4-15
4
Shatter protection (option)
Piercing/penetration hazard by objects from the front!
Work involving piercing/pentrating objects from the front can cause
accidents wth serious injuries or death.
► If the machine is equipped with a canopy, a shatter protection must be
installed if an attachment (a hammer, for example) causes fragments
to fly around. This shatter protection takes over the function of a front
window.
► Only work in the work range.
► Canopy operation is prohibited without a shatter protection.
Accident hazard in conditions of restricted visibility due to rain,
snowfall, dust etc.!
Restricted visibility can cause serious injuries or death.
► Resume work only if visibility is no longer restricted.
Do not use brushes, steel wool or other abrasive cleaners for cleaning the
polycarbonate disc. Do not wipe dust in a dry state.
The shatter protection protects the operator against fragments from the
front.
► The machine owner must ensure that the hazard situation is evaluated
and that the national regulations are observed.
► The machine owner must ensure that only work is performed that does
not require any higher protection.
► Accidents cannot be fully avoided despite equipping a machine with
protective structures.