3-2 OM EZ17 us 1.0 * ez17e300.fm
3
Overview of models and trade names
3.2 Brief description of the machine
The machine model EZ17 is a self-propelled work machine.
Get informed on and follow the legal regulations of your country.
This machine is a versatile and powerful helper for moving earth, gravel
and debris on construction sites and elsewhere. A wide range of
attachments accounts for the numerous applications of the machine,
among others hammer and grab applications. When using these
attachments, observe the legal regulations of your country and equip the
machine with all the safety equipment required. See chapter 1.4 Fields of
application and use of attachments on page 3-5 for further applications.
The main components of the machine are:
• Travel gear
- Travel gear
- Stabilizer blade
- Live ring
• Upper carriage
- Canopy
- Water-cooled diesel engine
- Hydraulic and electrical components
•Boom
The machine can be equipped with the “Telematic” option (for transmitting
operating data, location, etc. via satellite)!
The diesel engine permanently drives a variable displacement pump
whose oil flow is sent to the control valve. Depending on actuation, the
pump supplies the hydraulic motors or the work hydraulics with oil.
Shock cartridges (option)
The auxiliary hydraulics are equipped with Schock cartridges to
compensate pressure peaks in the hydraulic system.
Zero tail
With the telescopic travel gear extended, the upper carriage (without
counterweight) does not protrude beyond the width of the machine when it
is rotated.
Machine model/machine designation Trade name
E13-01 EZ17