OM EZ17 us 1.0 * ez17i400.fm 4-9
4
Adjusting the mirrors
Adjust the mirrors in order to:
• Ensure sufficient visibility from the seat onto the travel area and job
site.
• Ensure maximum visibility to the rear.
• Ensure visibility of the rear left edge of the machine in the left-hand
mirror.
• Ensure visibility of the rear right edge of the machine in the right-hand
mirror.
Set the machine to travel position before adjusting the mirrors –
see “Travel position” on page 5-3.
We recommend having the mirrors adjusted by a second person.
Do not make any modifications that impair visibility. Otherwise the
machine does not meet the requirements for conformity and licensing.
To Next Page
Loading...
Need help?
General
