EasyManua.ls Logo

Wacker Neuson EZ17 - Removing;Installing the Canopy

Wacker Neuson EZ17
256 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7-18 OM EZ17 us 1.0 * ez17w700.fm
7
Removing/installing the canopy
DANGER
Accident hazard when traveling without canopy!
Crushing hazard causing death or serious injuries.
Only remove the canopy when traveling very short distances through
passages.
Using the seat belt is prohibited.
Do not perform any work without a canopy.
Obtain the approval of the competent national authority.
Machine travel is only allowed on absolutely level ground.
Avoid tipping movements of the machine under all circumstances.
Traveling in areas involving a risk of falling objects is prohibited.
WARNING
Accident hazard due to incorrect loading!
Incorrect loading can cause accidents and serious injuries or death.
Ensure that no one is in the danger zone.
Removing
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Open the engine cover.
3. Remove shackle A in the engine compartment.
4. Remove the roof lights if they are installed on the machine.
5. Install shackle A and tighten the screw to 45 Nm (33.2 ft.lbs) (use a
schnorr lock and washer).
A
Fig. 179
A
Fig. 180

Table of Contents

Related product manuals