8-2 OM EZ17 us 1.0 * ez17b800.fm
8
8.2 Malfunctions of the traveling drive
8.3 Malfunctions of the hydraulic system
Malfunction/sign Possible cause Remedy See
Machine does not stay on track,
machine pulls to the right or left
Wrong track tension Tighten tracks correctly 7-49
Foreign bodies (stones, for
example) stuck in tracks
Remove foreign bodies --
Uneven wear of tracks
Contact a Wacker Neuson
service center
--
Malfunction/sign Possible cause Remedy See
Hydraulic system overheats
Dirty hydraulic oil radiator
Clean the hydraulic oil radi-
ator
7-36
Hydraulic oil level too low Add hydraulic oil 7-42
Malfunctioning or insuffi-
ciently tightened V-belt
Contact a Wacker Neuson
service center
--
The display element emits a continu-
ous buzzing sound
Malfunctioning pressure
switch of safe load indicator
Stop work immediately,
have the error repaired by
a Wacker Neuson service
center
--
Controls have no function
Control lever base raised
Lower the control lever
base
4-10
Malfunctioning fuse Check the fuse 9-4
Upper carriage cannot be swivelled Upper carriage locked Remove the pin 6-4
To Next Page
Loading...
Need help?
General
