OM EZ17 us 1.0 * ez17e300.fm 3-3
3
Canopy
The canopy has been specially designed for protection in case of an
accident.
• ROPS/TOPS tested canopy.
• Level I protective FOPS structure (option); protective structure against
falling objects.
• Shatter protection (option); protective structure against fragments
flying around from the front.
The machine is not available with a closed cab.
Therefore, a restricted work range applies to work with attachments
(hammer, for example) that can cause fragments to fly around (–
see chapter “ Shatter protection (option)” on page 4-15, figure.
Installing a protective Front Guard structure according to EN 474-5 (item
5.3.2.1) is not possible. Only perform work that does not require a
protective Front Guard structure.
Definition of FOPS/Front Guard levels
Level I:
Protection against small falling objects (FOPS) or small objects
penetrating into the cab from the front (Front Guard), such as bricks, small
pieces of concrete, tools, for machines that are used for repairing roads,
landscaping work and for working on other construction sites, for example.
Level II:
Protection against heavy falling objects (FOPS) or heavy objects
penetrating into the cab from the front (Front Guard), such as trees,
pieces of rock, for machines that are used for clearance work, demolition
work and forestry work, for example.
To Next Page
Loading...
Need help?
General
