7-32 OM EZ17 us 1.0 * ez17w700.fm
7
7.8 Engine lubrication system
Information regarding the engine lubrication system
Engine damage due to incorrect engine oil level.
► The oil level must be between the MIN and MAX marks.
Damage due to wrong engine oil.
► Use engine oil according to the engine/machine fluids and lubricants.
► Have the oil changed only by a Wacker Neuson service center.
Damage due to adding engine oil too quickly.
► Add the engine oil slowly so it can go down without entering the intake
system.
Check the oil level once a day. We recommend checking it before starting
the engine. After stopping a warm engine, wait at least 5 minutes before
checking.
Checking the engine oil level
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Open the engine cover.
3. Clean the area around the oil dipstick with a lint-free cloth.
4. Pull out oil dipstick A.
5. Clean it with a lint-free cloth.
6. Push oil dipstick A back in as far as possible.
7. Withdraw it and read off the oil level.
➥ The oil level must be between the MIN and MAX marks.
➥ Add engine oil if necessary.
8. Push oil dipstick A back in as far as possible.
9. Close and lock the engine cover.
To Next Page
Loading...
Need help?
General
