Wacker Neuson EZ17 - Proportional Controls (Option)

OM EZ17 us 1.0 * ez17b510.fm 5-23
5
Proportional controls (option)
The proportional controls make it possible to adapt the speed with which
the attachments move. Moving slide switch A slowly causes the
attachment to move slowly.
This control mode offers proportional operation of the auxiliary hydraulics
depending on the position of slide switch A on the control lever.
If precision work (for example with an offset bucket) does not require the
full oil flow, turn rotary switch B to the left (MIN).
If the full oil flow is required, turn the rotary switch to the right (MAX).
The proportional controls are only available for control circuits AUX II and
AUX III.
A
Fig. 105
Fig. 106
B