Wacker Neuson EZ38 - Page 130

5-34 OM EZ38 us 1.1 * ez38b510.fm
5
➥ The check pin K must be fully retracted.
Setting down an attachment
WARNING
Crushing hazard during removing attachments!
If an attachment is not removed correctly, it can tip over and cause serious
injuries or death.
► Ensure that no one is in the danger zone.
► Lower the attachment to level and firm ground ensuring stability.
1. Lower the attachment to about 5 – 10 cm (2 – 4 in) above the ground.
2. Actuate switch 42.
➥ The buzzer sounds.
3. Press and hold foot-operated pushbutton switch 3.
4. Pull and hold stabilizer-blade lever 8 as far as it will go.
➥ The quickhitch opens and unlocks the attachment.
Fig. 175
K
Fig. 176
42
3
8
Fig. 177