S E R V I C I N G A N D I N S PE C T I O N
147
W L 3 0
Work to be performed
Operating hours:
250, 750, 1000,
1250, 1750,
2000, 2250,
2750, 3000, etc.
Operating
hours: 1500,
2500, 3500,
4500, etc.
monthly annually
Check the lighting system – (if present) X X X X
Check the exhaust system X X
Check the hinge pins and joint bushings X X
Check the center pivot bolts and bearings X X
Check the pressure relief valves in the hydraulic system X X
Check the idle speed X X X X
Check max. speed when loaded and unloaded X X
Check the starter and alternator (engine manual) X X
Check the heater plugs and fuel injectors (engine manual) X X
Check the valve clearance, adjust if necessary X
For Deutz engines: Check the timing belt for engine timing and, if avail-
able, for auxiliary drive system (do not retighten, change every 5 years or
after 4500 op. hours)
X X
Check the fuel injectors (every 3000 operating hours)
Check the functioning of the engine enclosure locking mechanism, adjust
if necessary
X X X X
To Next Page
Loading...