EasyManua.ls Logo

Wacker Neuson WL 30

Wacker Neuson WL 30
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
S E R V I C I N G A N D I N S PE C T I O N
148
Work to be performed
Operating hours:
250, 750, 1000,
1250, 1750,
2000, 2250,
2750, 3000, etc.
Operating
hours: 1500,
2500, 3500,
4500, etc.
monthly annually
Check ROPS/FOPS structures X X
Check the condition of the tires and the tire pressure X X X X
Change the engine oil and lter (every 500 operating hours) X
Change the fuel lter – clean the pre-lter X X
Clean the fuel feed pump (for Deutz engines) X X
Clean the air lter, replace if necessary X X X X
Change the hydraulic uid X X
Change the hydro return lter X X
Pressure lter (rst change after 500 op. hours, further changes as
needed *)
Change the oil in the transfer case X X
Change the oil in the axles X X
Change the coolant – every 2 years
Are all the grease nipples lubricated? Lubricate if necessary X X X X
Lubricate the drive shafts (universal and slip joint) X X X X
Lubricate all the levers, cables and hinges with oil X X X X

Table of Contents

Related product manuals