Wacker Neuson WL 30

DESCRIP TIO N OF THE IN DICATOR, WA RNI NG AND CO NTROL E LEM ENTS
52
• If the indicator lights do not illuminate properly
at the starting sequence, repair the malfunction
before operating the machine.
•
If an indicator light illuminates during operation,
move the machine to a safe place, lower the
loader arms and stop the engine.
•
Do not operate the wheel loader until the reason
for the illuminated indicator is determined and
corrective action has been completed.
Immediately turn off the engine if a light marked with
this * symbol is illuminated in the adjacent table.
Control and warning indicator lights
Fig. 13 Control and warning lights
10
11
12
13
15
16
17
18
14