Watts AERCO Edge [ii] - SECTION 7: UNIT STATUS

Edge [ii] Controller Operation Manual
SECTION 7 – UNIT STATUS
OMM-139_E • 8/25/2020 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page 167 of 196
SECTION 7: UNIT STATUS
The Unit Status screen provides access to a variety of parameters that show the status of the
unit. In addition, in a BST Cascade, on the unit designated as a “Manager,” it provides access to
screens that display parameters showing the status of the entire cascade.
It is accessed by pressing Unit Status on the Main Menu.
Figure 7.0: Unit Status Screen
This Section includes the following topics:
7.1: Ignition Sequence
7.1.1: Demand
7.1.2: Auxiliary Delay Timers
7.1.3: Purging
7.1.4: Spark Cleaning
7.1.5: Ignition
7.2: Unit Status
7.3: Plant Status
7.4: BST Cascade Status
7.5 Isolation Valve Status
7.6: SmartPlate Status
7.7: Runtime Statistics
7.8: Unit Event History
7.9 Plant Event History
7.10: AERtrim
7.11: Ignition Sequence Summary
WARNING:
Before starting the instructions in this section for the first time, you must ensure that the unit
has the latest Edge Controller firmware. Complete the instructions in Section 6.2.7: Firmware
Update to obtain and install the latest firmware.